Description
- Entry. Start high near the outside wall and back up your entry slightly. Lift smoothly off the throttle and apply firm, straight-line braking to set the nose before turning down.
- Mid-Corner. Let the car roll down toward the bottom and hook your left-front tire right along the inside edge next to the sand/apron—that lighter gray bottom strip holds the best grip. Avoid hitting the inner “turtles” (curbs), which will upset the suspension.
- Exit. Let the car pivot in the center before touching the gas. Once the car points toward the backstretch (right as the inside sand ends), squeeze smoothly to 100% throttle so the car drives forward in a straight line rather than sliding sideways.
- Entry. Use the dashed line on the backstretch as your visual marker to lift and smoothly apply the brakes, angling the car diagonally down toward the bottom.
- Mid-Corner. Bring your left-side tires down onto the lighter-colored bottom groove. Keep your hands as steady as possible while the car rotates around the center.
- Exit. As soon as you clear the center apex and pass the inner grass/sand transition, roll smoothly into full throttle and let the car drift naturally out toward the outside wall to maximize your front stretch momentum.
- Prioritize Forward Drive Over Aggressive Entry. As shown in Team 53 Racing’s Myrtle Beach Late Model Stock Guide, waiting an extra split-second in the center of the corner so the car launches straight off the exit saves massive rear tire wear and gains significant lap time over a 10–15 lap run.
- Use the Second Lane Strategically. While the bottom groove has the most grip early on, the second lane up is very viable once tires heat up. Use the second groove to protect your position, avoid getting pinched on the bottom, or maintain momentum when passing slower traffic late in a run.
- Qualifying Tire Warmup. On your qualifying out-lap, weave smoothly and alternate gas and brake to build heat in the tires—just be careful to stay clear of the inside curbs so you don’t damage your alignment before your timed laps
Race Setup
A balanced, race-ready LMSC setup built for versatility, predictable rotation, and strong forward drive across multiple racing grooves.
The race setup is designed and taken into account for the fact that Myrtle Beach is a precision track. The car must stay perfectly balanced, perfectly straight, and perfectly planted. The teams that win here build setups that minimize drag, maximize platform stability, and give the driver confidence to attack the tricky bumps in the surface.
Qualifying Setup
A faster, more aggressive setup designed to maximize the grip to deliver the rotation, responsiveness, and single-lap speed needed for qualifying.
Setup Notes
Helpful notes from our builders covering braking technique, throttle application, preferred racing lines, lane versatility, and what to expect from the car as the tires and track conditions develop.

Reviews
There are no reviews yet.